Installation Procedure
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Install Exhaust Rear Muffler Insulator (2)
- Install Exhaust Rear Muffler Rear Hanger Fastener (1) and tighten 40 N.m (30 lb ft)
- Install Rear Bumper Fascia Rear Bumper Fascia Replacement
- Install Lifting and Jacking the Vehicle. Lifting and Jacking the Vehicle (ATS)Lifting and Jacking the Vehicle (ATS-V)
CAUTION:
Refer to Fastener Caution .