LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 228 (Exhaust System) >> Repair Instructions >> Catalytic Converter Brace Bracket Replacement (Lower, LTG) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

In order to avoid being burned, do not service the exhaust system while it is still hot. Service the system when it is cool.

WARNING:

Avoid contact with HOT components. Wear safety glasses and protective gloves to avoid personal injury.

  1. Raise and support the vehicle. Lifting and Jacking the Vehicle (ATS)Lifting and Jacking the Vehicle (ATS-V)
    2. Fig 1: Catalytic Converter Brace Bracket-Lower And Bolts
    GM4620829Courtesy of GENERAL MOTORS COMPANY
  2. Remove Catalytic Converter Brace Bracket Bolt (1)
  3. Remove Catalytic Converter Brace Bracket Bolt (2)
  4. Remove Catalytic Converter Brace Bracket-Lower (3)
    5. Fig 2: Anti-Rotation Tab Of Lower Brace Bracket
    GM4620920Courtesy of GENERAL MOTORS COMPANY
  5. Remove Catalytic Converter Brace Bracket Bolt (1)
  6. Remove Catalytic Converter Brace Bracket-Lower (2)
scientia non olet · About LEMON Manuals