LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 221 (Lighting System - Repair Instructions) >> Repair Instructions >> Brake Pedal Position Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the driver side instrument panel lower trim panel insulator. Refer to Instrument Panel Lower Trim Panel Insulator Replacement (Left Side)Instrument Panel Lower Trim Panel Insulator Replacement (Right Side) .
  2. Disconnect the brake pedal position sensor electrical connector.
    3. Fig 1: Brake Pedal Position Sensor Bolt
    GM2828486Courtesy of GENERAL MOTORS COMPANY
  3. Remove the brake pedal position sensor bolt (1).
    4. Fig 2: Brake Pedal Position Sensor
    GM2828490Courtesy of GENERAL MOTORS COMPANY
  4. Remove the brake pedal position sensor (1).
scientia non olet · About LEMON Manuals