Front Seat Belt Anchor Plate Tensioner Cover Replacement

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front Seat Belt Anchor Plate Tensioner Cover & Cap

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the driver or passenger seat. Refer to Driver or Passenger Seat Removal and Installation
1	Front Seat Belt Anchor Plate Tensioner Cover Cap
2	Front Seat Belt Anchor Plate Tensioner Cover CAUTION: Do not twist the cover during removal. Twisting the cover may cause the component to break. Procedure Firmly grasp the lower rear area of the finish cover, this area needs to be flexed outward then downward to disengage it from the seat cushion track. Remove the finish cover by gently pulling the cover outward to disengage it fully from the seat cushion track.

Callout

Component Name

Preliminary Procedure
Remove the driver or passenger seat. Refer to Driver or Passenger Seat Removal and Installation

Front Seat Belt Anchor Plate Tensioner Cover Cap

Front Seat Belt Anchor Plate Tensioner Cover

CAUTION:

Do not twist the cover during removal. Twisting the cover may cause the component to break.

Procedure

Firmly grasp the lower rear area of the finish cover, this area needs to be flexed outward then downward to disengage it from the seat cushion track.
Remove the finish cover by gently pulling the cover outward to disengage it fully from the seat cushion track.