Component Testing
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness at the Q49 Rear Differential Clutch Solenoid Valve.
- Test for 8-10 Ω between the control terminal 1 and the control terminal 2.
- If not between 8-10 Ω
Replace the Q49 Rear Differential Clutch Solenoid Valve.
- If between 8-10 Ω
- If not between 8-10 Ω
- Test for infinite resistance between each terminal and the Q49 Rear Differential Clutch Solenoid Valve case.
- If not infinite resistance
Replace the Q49 Rear Differential Clutch Solenoid Valve.
- If infinite resistance
- If not infinite resistance
- All OK.