Fastener Specifications
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front Floor Console Armrest Hinge Fastener | 9 N.m (80 lb in) |
| Front Floor Console Bolt | .75 N.m (7 lb in) |
| Front Floor Console Bracket Fastener | 9 N.m (80 lb in) |
| Front Floor Console Fastener | 9 N.m (80 lb in) |
| Front Floor Console Trim Plate Bolt | 2.5 N.m (22 lb in) |
| Heater and Air Conditioning Evaporator and Blower Module Bracket Bolt | 9 N.m (80 lb in) |
| Instrument Panel Accessory Center Trim Plate Bolt | 2.5 N.m (22 lb in) |
| Instrument Panel Compartment Bolt to Compartment Shelf | 1.3 N.m (12 lb in) |
| Instrument Panel Driver Knee Bolster Reinforcement Fastener | 9 N.m (80 lb in) |
| Instrument Panel Inflatable Restraint Module Bolt | 9 N.m (80 lb in) |
| Instrument Panel Insulator Bolt | 2.5 N.m (22 lb in) |
| Instrument Panel Knee Bolster Bolt | 2.5 N.m (22 lb in) |
| Instrument Panel Tie Bar Bolt | 22 N.m (16 lb ft) |
| Instrument Panel Tie Bar Brace Bolt | 22 N.m (16 lb ft) |
| Instrument Panel Tie Bar Brace Fastener | 9 N.m (80 lb in) |
| Instrument Panel Wiring Harness Fuse Block Bolt | 2 N.m (18 lb in) |
| Lower Instrument Panel Tie Bar Bolt | 22 N.m (16 lb ft) |
| Upper Instrument Panel Tie Bar Bolt | 22 N.m (16 lb ft) |