Component Testing
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness connector at the S70L Steering Wheel Controls Switch-Left.
- Test for infinite resistance between the signal terminal 11 and the ground terminal 6 with the switch in the open position.
- If less than infinite resistance
Replace the S70L Steering Wheel Controls Switch-Left.
- If less than infinite resistance
- Test for less than 2 Ω between the signal terminal 11 and the ground terminal 6 with the switch in the closed position.
- If 2 Ω or greater
S70L Steering Wheel Controls Switch-Left
- If less than 2 Ω
- If 2 Ω or greater
- All OK.