Driver Information Indicators

Brake Warning Indicator 

The instrument cluster turns the brake warning indicator ON when the following occurs:

• The instrument cluster performs the bulb check.
• The electronic brake control module detects a fault and sends a serial data message to the instrument cluster requesting illumination.
• The body control module detects that the park brake is engaged. The instrument cluster receives a serial data message from the body control module requesting illumination.

ABS Indicator 

The instrument cluster turns the ABS indicator ON when the following occurs:

• The instrument cluster performs the bulb check.
• The electronic brake control module detects a malfunction which disables the ABS and sends a serial data message to the instrument cluster requesting illumination.

Traction/Stability Control Indicator 

The instrument cluster turns the traction/stability control indicator ON when the following occurs:

• The instrument cluster performs the bulb check.
• The electronic brake control module detects a malfunction which disables the traction/stability control and sends a serial data message to the instrument cluster requesting illumination.
• The driver manually disables the traction/stability control by pressing and holding the traction control switch for five seconds. The electronic brake control module sends a serial data message to the instrument cluster requesting illumination.

Traction Control Off Indicator 

The instrument cluster turns the traction control off indicator ON when the following occurs:

• The instrument cluster performs the bulb check.
• The driver manually disables the traction control by pressing the traction control switch. The electronic brake control module sends a serial data message to the instrument cluster requesting illumination.

Stability Control Off Indicator 

The instrument cluster turns the stability control off indicator ON when the following occurs:

• The instrument cluster performs the bulb check.
• The electronic brake control module sends a serial data message to the instrument cluster requesting illumination.
• The driver manually disables the stability control by pressing and holding the traction control switch for five seconds. The electronic brake control module sends a serial data message to the instrument cluster requesting illumination.