Knock Sensor Replacement
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the intake manifold. Refer to Intake Manifold Replacement . |
|
| 1 | Knock Sensor Fasteners (Qty: 2)
CAUTION:
Refer to Fastener Caution . Tighten 25 N.m (18 lb ft) |
| 2 | Knock Sensors (Qty: 2) Procedure Disconnect the electrical wiring harness connectors from the knock sensors. |