LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 200 (Engine Controls And Fuel - 2.0L (LTG) - Repair Instructions) >> Repair Instructions >> Evaporative Emission Line Replacement - Engine to Chassis (LCV) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
    WARNING:

    Refer to Gasoline/Gasoline Vapors Warning .

    WARNING:

    Refer to Safety Glasses Warning .

  1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .
    2. Fig 1: Evaporative Emission Pipe
    GM2823555Courtesy of GENERAL MOTORS COMPANY
  2. Remove the evaporative emission pipe (1) from the evaporative emission canister purge solenoid valve and retainers. Refer to Plastic Collar Quick Connect Fitting Service .
  3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (ATS)Lifting and Jacking the Vehicle (ATS-V) .
  4. Remove the underbody front air deflector right side. Refer to Underbody Front Air Deflector Replacement - Right Side .
  5. Remove the front body exhaust heat shield right side. Refer to Front Body Exhaust Heat Shield Replacement (Right)Front Body Exhaust Heat Shield Replacement (Left) .
    6. Fig 2: Evaporative Emission Pipe
    GM2815714Courtesy of GENERAL MOTORS COMPANY
  6. Disconnect the evaporative emission pipe (1) and remove from retainers (2). Refer to Plastic Collar Quick Connect Fitting Service .
  7. Remove the evaporative emission pipe (1) from the vehicle.
scientia non olet · About LEMON Manuals