Camshaft Position Actuator Intake Solenoid Valve Replacement
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement . |
|
| 1 | Camshaft Position Actuator Intake Solenoid Valve Fastener
CAUTION:
Refer to Fastener Caution . Tighten 10 N.m (89 lb in) |
| 2 | Camshaft Position Actuator Intake Solenoid Valve Procedure Disconnect the electrical wiring harness connector from the camshaft position actuator intake solenoid valve. |