Fastener Specifications
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Aero Shutter Front Bumper Fascia Air Deflector Bolt | 2.5 N.m (22 lb in) |
| Front Bumper Fascia Bolt | 3 N.m (27 lb in) |
| Front Bumper Fascia Energy Lower Absorber Screw | 2.5 N.m (22 lb in) |
| Front Bumper Fascia Outer Air Deflector Bolt | 2.5 N.m (22 lb in) |
| Front Bumper Fascia Upper Bolt | 4 N.m (35 lb in) |
| Front Bumper Fascia Upper Support Bolt | 9 N.m (80 lb in) |
| Front Bumper Impact Bar Bolt | 32 N.m (24 lb ft) |
| Front Headlamp Bolt | 2.5 N.m (22 lb in) |
| Rear Bumper Fascia Lower Bracket Bolt | 9 N.m (80 lb in) |
| Rear Bumper Imapact Bar Nut | 40 N.m (30 lb ft) |
| Rear Bumper Lower Fascia Bolt | 2.5 N.m (22 lb in) |
| Rear Bumper Upper Fascia Bolt | 2.5 N.m (22 lb in) |