Front Bumper Fascia Upper Support Replacement

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front Bumper Fascia Upper Support

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the front bumper fascia center support. Refer to Front Bumper Fascia Center Support Replacement . If equipped remove the forward range radar module. Refer to Forward Range Radar Module Replacement Remove the 4 air baffle push-in retainer.
1	Front Bumper Fascia Upper Support Bolt (Qty: 6) CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
2	Front Bumper Fascia Upper Support Procedure Unclip the hood release electrical connector and electrical harness from the front bumper fascia upper support.

Callout

Component Name

Preliminary Procedures

Remove the front bumper fascia center support. Refer to Front Bumper Fascia Center Support Replacement .
If equipped remove the forward range radar module. Refer to Forward Range Radar Module Replacement
Remove the 4 air baffle push-in retainer.

Front Bumper Fascia Upper Support Bolt (Qty: 6)

CAUTION:

Refer to Fastener Caution .

Tighten
9 N.m (80 lb in)

Front Bumper Fascia Upper Support
Procedure
Unclip the hood release electrical connector and electrical harness from the front bumper fascia upper support.