Front Bumper Fascia Energy Upper Absorber Replacement (Coupe Outer)

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front Bumper Fascia Energy Upper Absorber

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement Front Bumper Fascia Replacement (V) Place the bumper fascia face down on a clean protected surface. Reposition front bumper fascia wiring harness.
1	Front Bumper Fascia Energy Upper Absorber Threaded Retainer (Qty 6)
2	Front Bumper Fascia Energy Upper Absorber Clip (Qty 2)
3	Front Bumper Fascia Energy Upper Absorber