LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 199 (Bumpers And Fascias) >> Repair Instructions >> Front Bumper Fascia Energy Upper Absorber Replacement (Coupe Inner) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Front Bumper Fascia Replacement Front Bumper Fascia Replacement (V) 
  2. Place the bumper fascia face down on a clean protective surface.
  3. Disconnect the wiring harness retainers from the front bumper fascia and reposition as necessary.
    4. Fig 1: Front Bumper Fascia Energy Upper Absorber
    GM3685248Courtesy of GENERAL MOTORS COMPANY
  4. Remove Front Bumper Fascia Energy Upper Absorber Threaded Retainer (1)
  5. Remove Front Bumper Fascia Energy Upper Absorber Clip (2)
  6. Remove Front Bumper Fascia Energy Upper Absorber-Outer (3)
    7. Fig 2: Front Bumper Fascia Energy Upper Absorber
    GM3975407Courtesy of GENERAL MOTORS COMPANY
  7. Remove Front Bumper Fascia Energy Upper Absorber Clip (1)
  8. Remove Front Bumper Fascia Energy Upper Absorber -Inner (2)
scientia non olet · About LEMON Manuals