Fastener Specifications (On Vehicle)
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Backup Lamp Switch Fasteners | 27 N.m (20 lb ft) |
| Clutch Housing Assembly to Transmission Case Bolts | 50 N.m (37 lb ft) |
| Propshaft Transmission Yoke Nut | 136 N.m (100 lb ft) |
| Reverse Lockout Assembly Bolt | 18 N.m (13 lb ft) |
| Reverse Lockout Solenoid | 40 N.m (30 lb ft) |
| Shift Control Assembly Fasteners | 18 N.m (13 lb ft) |
| Shift Fork Position Sensor Fasteners | 10 N.m (89 lb in) |
| Transmission Case Drain Plug | 27 N.m (20 lb ft) |
| Transmission Case Fill Plug | 27 N.m (20 lb ft) |
| Transmission Control Lever Knob Fasteners | 58 N.m (43 lb ft) |
| Transmission Fluid Temperature Sensor/Drain Plug | 27 N.m (20 lb ft) |
| Transmission Mount Fasteners | 58 N.m (43 lb ft) |
| Transmission Neutral Position Sensor Fasteners | 11 N.m (96 lb in) |
| Vehicle Speed Sensor (VSS) Bolt | 10 N.m (89 lb in) |