Transmission Rear Mount Replacement

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Transmission Rear Mount And Bolts

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
NOTE: The transmission support and the transmission mount are replaced as an assembly. Preliminary Procedures Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (ATS)Lifting and Jacking the Vehicle (ATS-V) Support the transmission with a suitable jack.
1	Transmission Support Crossmember Bolt (Qty: 4) CAUTION: Refer to Fastener Caution Tighten 58 N.m (43 lb ft)
2	Transmission Mount Bolt (Qty: 2) Tighten 58 N.m (43 lb ft)
3	Transmission Support Crossmember