Transmission Fluid Level Inspection (M3L)
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle (ATS) .
- Clean any dirt from around the fill plug (1).
- Remove the transmission fill plug from the transmission.
- Check that the transmission fluid level is even with the bottom of the fill plug hole.
- Add fluid, if necessary. Refer to Adhesives, Fluids, Lubricants, and Sealers (M3L)
- Install the transmission fill plug (1) to the transmission and tighten the fill plug to 27 N.m (20 lb ft).
- Lower the vehicle.
CAUTION:
Refer to Fastener Caution .