Inverter Lever Removal
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the clutch housing bolts (1).
- Remove the clutch housing assembly (1).
- Remove the manual transmission shift lever retainer (1).
- Remove the manual transmission selector lever pivot pin (1).
- Remove the manual transmission selector lever (1).
- Temporarily reinstall the clutch housing assembly (1).
- Temporarily reinstall the clutch housing bolts (1).
NOTE:
Discard the retainer.
NOTE:
May need to use heat, pin has sealant on it.