Diagnostic Aids
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Excessive slipping of the clutch can occur if the system is overheated for example by vehicle launches with high engine speed and torque, an abusive customer behavior, or a defective/worn clutch system.
- The scan tool Distance Since Excessive Clutch Slip Detected parameter may aid in determining conditions of the last clutch slip event.
- A vehicle speed sensor/transmission output shaft speed sensor fault may cause DTC P17A2 to set.
- A vehicle speed sensor rotor that is loose on the output shaft may cause DTC P17A2 to set.