LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 198 (Manual Transmission - TREMEC 6-Speed (M3L Mg9)) >> Diagnostic Information and Procedures >> DTC P0806-P0808: Clutch Pedal Position (CPP) Sensor >> Typical Scan Tool Data

Typical Scan Tool Data

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
CPP Sensor Voltage

Circuit Short to Ground Open Short to Voltage
Operating Conditions:  Ignition ON.
Parameter Normal Range:  1 V with clutch pedal applied to 4 V when clutch pedal is released.
5 Volt Reference 0V 0V 5V
Signal 0V 0V 5V
Low Reference - 5V -
CPP Sensor Percentage

Circuit Short to Ground Open Short to Voltage
Operating Conditions:  Ignition ON.
Parameter Normal Range:  0% with clutch pedal released to 100% when clutch pedal is applied.
5 Volt Reference 100% 100% 0%
Signal 100% 100% 0%
Low Reference - 0% -