Removal Procedure
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (ATS)Lifting and Jacking the Vehicle (ATS-V) .
- Support the transmission with a suitable jack and a block of wood.
- Remove the travel mount bolt (1).
- Remove the transmission support retaining bolts (2), then remove the transmission support (3) from the vehicle.
NOTE:
The engine mounts must NOT bend or deflect from the vertical position, damage to the mount will occur.