LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 196 (Frame And Underbody) >> Repair Instructions >> Front Crossmember Brace Replacement (Right Side - LF4) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Front Crossmember Brace
    GM4532649Courtesy of GENERAL MOTORS COMPANY
  1. Install Front Crossmember Brace (2)
    2. CAUTION:

    Refer to Fastener Caution

  2. Install Front Crossmember Brace Bolt (1) and tighten 22 N.m (16 lb ft)
    3. Fig 2: Radiator Outlet Hose And Clamp
    GM4044993Courtesy of GENERAL MOTORS COMPANY
  3. Install Radiator Outlet Hose (2)Radiator Outlet Hose Replacement (LF4)
    4. Fig 3: Drivetrain and Front Suspension Cradle Bolts
    GM4532648Courtesy of GENERAL MOTORS COMPANY
  4. Install Drivetrain and Front Suspension Cradle Front Bolt (2) and tighten 100 N.m (74 lb ft)
  5. Drivetrain and Front Suspension Cradle Bolt (1) Tighten 100 N.m (74 lb ft)
    6. Fig 4: Front Cradle Shear Plate (Left Side LF4)
    GM4010661Courtesy of GENERAL MOTORS COMPANY
  6. Install Front Cradle Shear Plate (3) Front Cradle Shear Plate Replacement (V Series) 
  7. Lower the vehicle.
scientia non olet · About LEMON Manuals