LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 194 (Automatic Transmission Cooling System) >> Repair Instructions >> Transmission Fluid Cooler Pipe Seal Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Transmission Fluid Cooler Pipe Seals
    GM2663868Courtesy of GENERAL MOTORS COMPANY
  1. Using DT-47770  installer, install the transmission fluid cooler pipe seals (1) in the transmission.
    2. Fig 2: View Of Oil Cooling Lines & Bolt
    GM1705099Courtesy of GENERAL MOTORS COMPANY
  2. Install transmission fluid cooler pipes (1) the to the transmission.
    3. CAUTION:

    Refer to Fastener Caution .

  3. Install the transmission fluid cooler pipe bolt (2) to the transmission and tighten to 22 N.m (16 lb ft).
  4. Lower the vehicle.
  5. Check the transmission fluid level.
scientia non olet · About LEMON Manuals