Removal Procedure
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Lifting and Jacking the Vehicle (ATS-V)
- Remove the right side underbody front air deflector bolt (1).
- Remove the transmission fluid cooler pipe clips (2) from the right side underbody front air deflector.
- Remove Transmission Fluid Cooler Pipe Fitting Retainer (1) @Transmission Fluid Cooler Pipe(Mid Line Right)Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection
- Remove Transmission Fluid Cooler Pipe(Mid Line Right) (2) @Transmission Fluid Cooler Inlet and Outlet Pipe
- Remove Transmission Fluid Cooler Pipe Fitting Retainer (1) @Transmission Fluid Cooler Pipe(Rear Differential Outlet Hose)Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection
- Remove Transmission Fluid Cooler Pipe(Mid Line Right) (2) @Transmission Fluid Cooler Pipe(Rear Differential Outlet Hose)
- Remove Transmission Fluid Cooler Pipe(Mid Line Right) (1)
- Transfer components as necessary.
NOTE:
Cover or plug all open transmission fluid cooler pipe connection points to help avoid any accidental contamination.
NOTE:
Cover or plug all open transmission fluid cooler pipe connection points to help avoid any accidental contamination.