Installation Procedure
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Position the transmission fluid auxiliary cooler inlet pipe (1) on the vehicle.
- Install Transmission Fluid Cooler Pipe Fitting Retainer (1)@Radiator Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection
- Install Transmission Fluid Auxiliary Cooler Inlet Pipe (2)@Radiator
- Install Transmission Fluid Cooler Pipe Fitting Retainer (1) @Air Conditioning Condenser Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection
- Install Transmission Fluid Auxiliary Cooler Inlet Pipe (2) @Air Conditioning Condenser
- Install Radiator Upper Bracket - Left Side.Radiator Upper Bracket Replacement (LTG, LGX)
- Install Front Compartment Front Sight Shield.Front Compartment Front Sight Shield Replacement (Sedan)Front Compartment Front Sight Shield Replacement (Coupe)
- Install Air Cleaner Assembly.Air Cleaner Assembly Replacement (LGX)
- Fill the transmission to the proper level with NEW transmission fluid. Transmission Fluid Level and Condition Check
- Inspect for transmission fluid leaks.