Upper Intake Manifold Bracket Replacement
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove Intake Manifold Cover. Refer to Intake Manifold Cover Replacement |
|
| 1 | Upper Intake Manifold Bracket Fastener (Qty: 2)
CAUTION:
Refer to Fastener Caution . Procedure Remove ONLY the upper push in retainers that attach the outer fuel pump insulator to the bracket then gently reposition the insulator to access the bracket fasteners. Fuel Pump Insulator Replacement (Inner)Fuel Pump Insulator Replacement (Outer)
NOTE:
Removal of front panel plenum is not necessary when removing ONLY the upper push in retainers from the fuel pump insulator. Tighten 10 N.m (89 lb in) |
| 2 | Upper Intake Manifold Bracket |