Installation Procedure
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Install the PCV hose assembly and PCV valves (3).
- Install the NEW PCV valve fasteners (1) using EN-50956 tamper proof drive bit and tighten to 10 N.m (89 lb in).
- Install the PCV hose fastener (2) and tighten to 12 N.m (106 lb in).
- Connect Positive Crankcase Ventilation Tube @ Air Cleaner Outlet Duct. Refer to Air Cleaner Outlet Duct Replacement (LTG)
- Install Intake Manifold Cover. Refer to Intake Manifold Cover Replacement
CAUTION:
Refer to Fastener Caution .