LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 186 (Engine Mechanical - 2.0L (LTG) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Engine Oil Cooler Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine oil filter. Refer to Engine Oil and Oil Filter Replacement .
  2. Engine Mount-Left Side - Remove - Engine Mount Replacement - Left Side .
  3. Engine Mount Bracket - Left Side - Remove - Engine Mount Bracket Replacement - Left Side (LCV) , or Engine Mount Bracket Replacement - Left Side (LTG) .
    4. Fig 1: Engine Oil Cooler Fastener
    GM2874855Courtesy of GENERAL MOTORS COMPANY
  4. Remove the engine oil cooler fastener (1).
    5. Fig 2: Engine Oil Cooler Hoses And Connector
    GM2874857Courtesy of GENERAL MOTORS COMPANY
  5. Remove the engine oil cooler hose (1) and (2).
  6. Remove the engine oil cooler connector (3).
    7. Fig 3: Engine Oil Cooler
    GM2874859Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    DISCARD the old engine oil cooler seal.

  7. Remove the engine oil cooler (1).
scientia non olet · About LEMON Manuals