LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 186 (Engine Mechanical - 2.0L (LTG) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Crankshaft Rear Oil Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
  1. If equipped with an automatic transmission, remove the automatic transmission flex plate. Refer to Automatic Transmission Flex Plate Replacement .
  2. If equipped with an manual transmission, remove the engine flywheel. Refer to Engine Flywheel Replacement .
  3. Fig 1: Crankshaft Rear Oil Seal
    GM2812543Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Do not damage the outside diameter of the crankshaft or chamber with any tool.

  4. Use a suitable tool to remove the crankshaft rear oil seal (1).