LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 186 (Engine Mechanical - 2.0L (LTG) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Balancer Shaft with Oil Pump Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove Oil Pan (Upper). Refer to Oil Pan Replacement (Upper) 
  2. Remove Timing Chain Crankshaft Sprocket. Refer to Timing Chain Crankshaft Sprocket Replacement 
    3. Fig 1: Balancer Shaft with Oil Pump
    GM4176256Courtesy of GENERAL MOTORS COMPANY
  3. Remove Balancer Shaft with Oil Pump Bolts (1) (Qty: 8)
  4. Remove Balancer Shaft with Oil Pump (2)
    5. NOTE:

    If replacing the oil pump, remove it from the balancer shaft.

  5. Remove the oil pump. Refer to Balancer Shaft with Oil Pump Disassemble
scientia non olet · About LEMON Manuals