Removal Procedure

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools

EN 50792 Flywheel Holding Tool
EN-45059 Angle Meter

For equivalent regional tools: Special Tools

Remove Transmission. Refer to Transmission Replacement (M5N with LTG Engine)Transmission Replacement (M5T with LCV Engine)

Fig 1: Flywheel Holding Tool

Courtesy of GENERAL MOTORS COMPANY

To prevent crankshaft rotation, install EN 50792 holding tool (2) and starter motor bolts (1) at the starter motor location and engaging the automatic flex plate.

Fig 2: Automatic Flex Plate And Bolts

Courtesy of GENERAL MOTORS COMPANY

Remove the automatic flex plate attaching bolts (1).
Remove the automatic flex plate (2).
Remove EN 50792 holding tool.
For automatic flex plate cleaning and inspection. Refer to Automatic Transmission Flex Plate Cleaning and Inspection