Reverse Flushing Setup
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Install both GE-45268-9 (2) onto the GE-45268-10 (3).
- Install the GE-45268-8 (4) onto the suction side of the GE-45268-10 (3).
- Install the GE-45268-7 (1) onto the discharge side of the GE-45268-10 (3).
NOTE:
Reverse flow refrigerant flush is recommended for desiccant bag failure. Replace the condenser/receiver dehydrator assembly when the A/C flush is complete and perform the following procedure:
NOTE:
Inspect and lubricate the GE-45268 A/C Flushing Adapter Kit fitting O-rings. Refer to Air Conditioning O-Ring Seal Replacement