Fastener Specifications
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Cargo Tie Down Loop Fastener | 20 N.m (15 lb ft) |
| Center Pillar Upper Garnish Molding Fastener | 3 N.m (27 lb in) |
| Front Side Door Inside Handle Fastener | 2.5 N.m (22 lb in) |
| Front Side Door Pull Handle Fastener | 1.5 N.m (13 lb in) |
| Front Side Door Trim Panel Fastener | 2.5 N.m (22 lb in) |
| Rear Compartment Lid Inside Handle Fastener | 2.5 N.m (22 lb in) |
| Roof Rail Assist Handle Fastener | 6 N.m (53 lb in) |