Rear Side Door Replacement

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Side Door

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Rear Side Door Check Link to Body Bolt CAUTION: Refer to Fastener Caution . Procedure Apply masking tape to the edges of the door. Remove the water deflector. Reposition the electrical harness boot, remove the connector body from the pillar and disconnect the door electrical connector. Tighten 22 N.m (16 lb ft)
2	Rear Side Door Lower Hinge to Door Bolt (Qty: 2) Procedure Support the door before removing the hinge bolts. With an assistant, remove the door. Tighten 25 N.m (18 lb ft)
3	Rear Side Door Upper Hinge to Door Bolt (Qty: 2) Tighten 25 N.m (18 lb ft)
4	Rear Side Door Procedure If replacing the door, transfer parts as necessary. Adjust the rear side door as needed. Refer to Rear Side Door Adjustment .