Heater Inlet And Outlet Pipe Replacement (LGX)

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Heater Inlet And Outlet Pipe (LGX)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Refer to Fuel Pipe Shield Replacement (LGX) Disconnect Heater Inlet Hose@Heater Inlet and Outlet Pipe - Heater Inlet Hose Replacement (LGX) Disconnect Heater Outlet Hose@Heater Inlet and Outlet Pipe - Heater Outlet Hose Replacement (LGX)
1	Heater Inlet and Outlet Pipe Bracket Bolt CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
2	Heater Inlet and Outlet Pipe Bolt (Qty: 2) Tighten 9 N.m (80 lb in)
3	Heater Inlet and Outlet Pipe Gasket Procedure Install a NEW gasket.
4	Heater Inlet and Outlet Pipe