Removal Procedure
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Lifting and Jacking the Vehicle (ATS)
- Remove Front Bumper Fascia Air Deflector (4) - Front Air Deflector Replacement
- Drain the coolant. Cooling System Draining and Filling (Static) Cooling System Draining and Filling (GE 47716)
- Engine Coolant Fan Shroud Bolt (1)
- Unclip Transmission Fluid Cooler Pipe@Engine Coolant Fan Shroud (2)
- Remove the supports and lower the vehicle.
- Remove Front Compartment Front Sight Shield (4) - Front Compartment Front Sight Shield Replacement (Sedan)Front Compartment Front Sight Shield Replacement (Coupe)
- Remove Air Cleaner Outlet Duct (2)- Air Cleaner Outlet Duct Replacement (LTG)
- Remove Air Cleaner Assembly (1) - Air Cleaner Assembly Replacement (LTG)
- Disconnect the electrical connector. (2)
- Remove Push Pin (1) @Engine Coolant Fan Shroud
- Unclip Engine Mount Vacuum Filter (1) @Engine Coolant Fan Shroud - Engine Mount Vacuum Filter Replacement
- Remove Engine Coolant Fan Shroud Bolt (1)
- Unclip Transmission Fluid Cooler Pipe (2) @Engine Coolant Fan Shroud
- Remove Transmission Fluid Cooler Pipe (2) @Radiator Assembly - Transmission Fluid Cooler Inlet and Outlet Pipe Replacement (LTG With RWD, With V03)Transmission Fluid Cooler Inlet and Outlet Pipe Replacement (LTG With AWD, With V03)
- Remove Radiator Outlet Hose (2) @Radiator Assembly - Radiator Outlet Hose Replacement (LTG with V03)
- Remove Radiator Inlet Hose (2) @Radiator Assembly - Radiator Inlet Hose Replacement (LTG)
- Remove Engine Coolant Fan Shroud (1)@Radiator Assembly