Circuit/System Verification
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition On/Vehicle In Service Mode
- Verify the scan tool parameter: Ambient Air Temperature = -40 and 88°C (-40 and 190°F) and changes
- If not between -40 and 88°C (-40 and 190°F) or does not change
Refer to: Circuit/System Testing
- If between -40 and 88°C (-40 and 190°F) and changes
- If not between -40 and 88°C (-40 and 190°F) or does not change
- All OK.