Water Pump Removal (LGX)

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Water Pump (LGX)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Water Pump Pulley Bolt (Qty: 4)
2	Water Pump Pulley Procedure Install the EN-46104 Water Pump Pulley Holding Tool onto the water pump pulley mounting holes. Remove the water pump pulley bolts. Remove the EN-46104 Water Pump Pulley Holding Tool from the water pump pulley. Special Tools EN-46104 Water Pump Pulley Holding Tool For equivalent regional tools, refer to Special Tools (LGX) .
3	Water Pump Bolt (Qty: 5) NOTE: Remove and DISCARD the bolt.
4	Engine Front Cover Bolt (Qty: 9) NOTE: Remove and DISCARD the bolt.
5	Water Pump
6	Water Pump Locating Pin (Qty: 2)
7	Water Pump Gasket NOTE: Remove and DISCARD the gasket.