Intake Manifold Removal (LGX)
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Fuel Pipe Shield Bolt (Qty: 2) |
| 2 | Fuel Pipe Shield Bolt |
| 3 | Fuel Pipe Shield |
| 4 | Engine Rear Noise Shield
WARNING:
The noise cancelling foam component MUST be replaced if it has been exposed to engine fluids. Failure to replace the noise cancelling foam component that has been exposed to engine fluids may result in an engine fire resulting in catastrophic engine damage, and possible injury or death. |
| 5 | Positive Crankcase Ventilation Tube Connector |
| 6 | Intake Manifold Bolt (Qty: 8) |
| 7 | Intake Manifold |