Intake Manifold Disassemble (LGX)
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Intake Manifold Insulator Retainer (Qty: 4) |
| 2 | Intake Manifold Insulator |
| 3 | Throttle Body Bolt (Qty: 4) |
| 4 | Throttle Body |
| 5 | Throttle Body Gasket
NOTE:
Remove and DISCARD the gasket. |
| 6 | Evaporative Emission Canister |
| 7 | Manifold Absolute Pressure Sensor Bolt |
| 8 | Manifold Absolute Pressure Sensor |
| 9 | Intake Manifold Seal
NOTE:
Remove and DISCARD the seal. |