Heater Inlet and Outlet Pipe Installation
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Heater Inlet and Outlet Pipe Gasket
NOTE:
Install a NEW gasket. |
| 2 | Heater Inlet and Outlet Pipe |
| 3 | Heater Inlet and Outlet Pipe Bolt - M6 x 25 (Qty: 2)
CAUTION:
Refer to Fastener Caution . Tighten 9 N.m (80 lb in) |
| 4 | Heater Inlet and Outlet Pipe Bolt - M6 x 20 Tighten 9 N.m (80 lb in) |