Crankshaft Removal

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Crankshaft Main Bearing Cap Side Bolts

Courtesy of GENERAL MOTORS COMPANY

Remove the crankshaft bearing cap side bolts.
Remove the crankshaft bearing cap outer bolts.
Remove the crankshaft bearing cap inner bolts.

Fig 2: Crankshaft Main Bearing Caps And Removal Tool

Courtesy of GENERAL MOTORS COMPANY

Remove the crankshaft bearing caps using the EN J 6125-1B adapter (1) and EN 49102 remover (2).

Fig 3: Crankshaft

Courtesy of GENERAL MOTORS COMPANY

Using two hands, lift the crankshaft straight up from the engine block.
Place the crankshaft in a secure place.

Fig 4: Crankshaft Key

Courtesy of GENERAL MOTORS COMPANY

Remove the crankshaft key from the nose of the crankshaft, if damaged.