LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 168 (Engine Mechanical - 3.6L (LGX LF4) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Clutch Pilot Bearing Removal

Clutch Pilot Bearing Removal

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Clutch Pilot Bearing
GM4017627Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
1 Clutch Pilot Bearing

Procedure

  1. Install GE-23907 
  2. Remove Clutch Pilot Bearing
  3. Remove GE-23907 
NOTE:

DISCARD the clutch pilot bearing.


Special Tools 
GE-23907  Slide Hammer with Bearing Adapter
For equivalent regional tools, refer to Special Tools (LGX)Special Tools (LF4) .