LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 168 (Engine Mechanical - 3.6L (LGX LF4) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Camshaft Removal - Left Side (LF4)

Camshaft Removal - Left Side (LF4)

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Markings On Bearing Caps
    GM1306294Courtesy of GENERAL MOTORS COMPANY
  1. Observe the markings on the bearing caps. Each bearing cap is marked in order to identify its location. The markings have the following meanings:
    • The raised feature must always be oriented toward the center of the cylinder head.
    • The I indicates the intake camshaft.
    • The E indicates the exhaust camshaft.
    • The number indicates the journal position from the front of the engine.
    2. Fig 2: Camshaft Bearing Caps And Bolts
    GM1977893Courtesy of GENERAL MOTORS COMPANY
  2. Remove the camshaft bearing cap bolts.
  3. Remove the camshaft bearing caps.
    4. Fig 3: Camshafts And Cylinder Head
    GM1977898Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Mark the camshafts upon removal to ensure installation is in the correct position.

  4. Remove the camshafts.
scientia non olet · About LEMON Manuals