Component Testing
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Test for 266-294 Ω between the 5 V reference voltage circuit terminal 5 of the switch and signal circuit terminal 2 of the switch.
- If not within the specified range
Replace the S126 Drive Mode Select switch.
- If within the specified range
- If not within the specified range
- Test for 2, 640-2, 920 Ω between the 5 V reference voltage circuit terminal 5 of the switch and the ground circuit terminal 9 of the switch.
- If not within the specified range
Replace the S126 Drive Mode Select switch.
- If within the specified range
- If not within the specified range
- With the switch button depressed to Decrement mode, test for 447-495 Ω between the 5 V reference voltage circuit terminal 5 of the switch and the ground circuit terminal 9 of the switch.
- If not within the specified range
Replace the S126 Drive Mode Select switch.
- If not within the specified range