Manifold Absolute Pressure Sensor Replacement (LGX)
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove Intake Manifold Cover. Refer to Intake Manifold Cover Replacement (LGX) |
|
| 1 | Manifold Absolute Pressure Sensor Fastener
CAUTION:
Refer to Fastener Caution . Tighten: 10 N.m (89 lb in) |
| 2 | Manifold Absolute Pressure Sensor Procedure Disconnect Electrical Connector @ Manifold Absolute Pressure Sensor
NOTE:
Always install the seal supplied with the manifold absolute pressure sensor. |