Installation Procedure
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Install a NEW seal (2) and the fuel tank module (1).
- Connect the fuel pump vent hose (2) and transfer hose (1). Refer to Plastic Collar Quick Connect Fitting Service .
- Use the CH 45722 wrench by turning clockwise and install the lock ring (1).
- Connect the fuel pump electrical connector and the quick connects. Refer to Plastic Collar Quick Connect Fitting Service .
- Install the fuel tank. Refer to Fuel Tank Replacement .