LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 166 (Engine Controls And Fuel - 3.6L (LGX LF4) - Repair Instructions) >> Repair Instructions >> Fuel Sender Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
    WARNING:

    Refer to Gasoline/Gasoline Vapors Warning .

    WARNING:

    Refer to Safety Glasses Warning .

  1. Remove the fuel tank. Refer to Fuel Tank Replacement .
  2. Disconnect the fuel sender assembly electrical connector.
    3. Fig 1: Fuel Sender Assembly Lock Ring
    GM2811776Courtesy of GENERAL MOTORS COMPANY
  3. Use the CH 45722  wrench by turning counter clockwise and remove the lock ring (1).
    4. Fig 2: Fuel Sender Assembly Transfer Hose
    GM2811762Courtesy of GENERAL MOTORS COMPANY
  4. Disconnect the fuel sender assembly transfer hose (1). Refer to Plastic Collar Quick Connect Fitting Service .
    5. Fig 3: Fuel Sender Assembly And O-Ring
    GM2811766Courtesy of GENERAL MOTORS COMPANY
  5. Remove the fuel sender assembly (1) and the O-ring (2).
scientia non olet · About LEMON Manuals