LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 166 (Engine Controls And Fuel - 3.6L (LGX LF4) - Repair Instructions) >> Repair Instructions >> Camshaft Position Sensor Replacement - Bank 2 (Left Side) Exhaust (LGX) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove Intake Manifold Cover. Refer to Intake Manifold Cover Replacement (LGX) »Remove
    2. Fig 1: Camshaft Position Sensor And Electrical Connector
    GM4121847Courtesy of GENERAL MOTORS COMPANY
    WARNING:

    Refer to Safety Glasses Warning .

  2. Use compressed air to remove debris from the Camshaft Position Sensor and surrounding cavities.
  3. Disconnect Camshaft Position Sensor Electrical Connector (1) @ Camshaft Position Sensor (2)
    4. Fig 2: Camshaft Position Sensor, Bolt And O-Ring
    GM4121841Courtesy of GENERAL MOTORS COMPANY
  4. Remove Camshaft Position Sensor Bolt (1)
  5. Remove Camshaft Position Sensor (2)
scientia non olet · About LEMON Manuals